Geogriglie monoassiali

Le geogogriglie sono utilizzate principalmente per scopi di rinforzo in quanto la loro peculiare struttura è in grado di fornire la resistenza necessaria per rinforzare il materiale di riempimento e di confinare le particelle di terreno che si depositano nelle aperture della griglia stessa. Sono caratterizzati dall’avere una resistenza alla trazione principale, normalmente nella direzione MD, dove le prestazioni CMD sono ridotte al minimo come richiesto dalla tecnologia di produzione delle geogriglie.

ParaGrid™
High tenacity core with a thick PE coating with strength from 30 to 200 kN/m to be used in standard soil reinforcement applications (mostly retaining structures) in any soil including aggressive ones characterized by high values of ph

Documentazione Geogriglie monoassiali

ParaGrid™ HF
Similar to ParaGrid as structure but mostly used in combination with Terramesh units as primary reinforcement. Their strength varies from 90 to 250 kN/m and can be used in any soil including aggressive ones characterized by high values of ph

ParaLink™
Again a strip based structure mostly used in basal reinforcement applications (but not exclusively) as piled embankment foundations, sink holes application or foundation on soft soils. Their strength varies from 300 to 1600 kN/m and can be used in any soil including aggressive ones characterized by high values of ph

ParaDrain™
Similar to ParaGrid but with a draining capacity in the MD direction obtained by shaping the strips with a channel profile closed by a geotextile filter. This unique composite is designed to be used with very thin or cohesive soils in very demanding geotechnical situations.

Paragrid™ W
An enhanced high performance knitted geogrid characterized by a very high modulus and the lowest reduction factors. Designed for standard soil reinforcement application with a specific focus on segmental wall applications. This family is suitable for use with standard soils characterized by 4</=ph</=9