Maccaferri Macmat® R is a geomat made from a three-dimensional matrix of UV stabilized, non-degradable synthetic fibres, heat bonded where they cross, extruded onto a double twisted steel woven mesh. The reinforcing hexagonal double twisted steel wire mesh has mechanical characteristics greater than the ones recommended in EN 10223-3. The steel wire is with heavily galvanised and may also be protected with an extruded polymeric coating for greater protection.

Used on vulnerable soil slopes, exposed to erosion, MacMat® R immediately increases the soil’s resistance to erosion by providing an environment that enhances the growth of vegetation through the mat. Quality topsoil is brushed into the 3-d matrix of the mat following installation.

It is also used within water courses to provide hydraulic erosion protection. The MacMat® R is secured to the ground using suitable pins / stakes as required in the project.

Its most common use however, is within soil nailed slopes; the soil nails provide the overall slope reinforcement with the MacMat® R providing surface strengthening and support between the nail heads.

Our NEW MacMat R now has a punch resistance of 70kN (in accordance with UNI 11437) and a tensile strength of 55kN/m making it even better for soil nailed slopes; download the Technical Data Sheet for more details.

It is also now available with a green 3D matrix further improving its ‘just installed’ aesthetic before vegetation has had chance to establish.

MacMat® R can now be installed using our NEW DT Links instead of lacing wire or pneumatically installed C-rings! These links connect the adjacent panels of MacMat® together, speeding up your installation time. They are installed by hand and require no tools.


need more information maccaferri