MonoAxial GeoGrids
Geogrid เสริมกำลังดินเพื่อเพิ่มเสถียรภาพของโครงสร้าง
Geogrid ช่วยเพิ่มความแข็งแรงและเสถียรภาพให้แก่มวลดินหรือวัสดุถม โดยทำหน้าที่ รับแรงดึงและยึดรั้งวัสดุให้อยู่ในตำแหน่ง ทำให้โครงสร้างดินสามารถรองรับแรงได้ดีขึ้น
Monoaxial Geogrid มีจุดเด่นที่กำลังรับแรงดึงสูงในทิศทางหลัก ซึ่งโดยทั่วไปเป็นแนวการผลิต (Machine Direction: MD) ส่วนแนวขวาง (Cross-Machine Direction: CMD) ทำหน้าที่ช่วยคงรูปของตาข่าย จึงไม่ได้ออกแบบให้รับแรงดึงหลัก
ผลิตภัณฑ์ Geogrid ของ Maccaferri มีความเฉพาะตัวสูง โดยแต่ละกลุ่มได้รับการออกแบบและพัฒนาขึ้นเพื่อตอบโจทย์ข้อกำหนดของงานได้ดีที่สุด ทั้งในแง่วิศวกรรม เช่น สมรรถนะการรับแรงทั้งในระยะสั้นและระยะยาว ความทนทาน การทำงานร่วมกับดิน ไปจนถึงด้านความยั่งยืน เช่น ผลกระทบต่อสิ่งแวดล้อม การรีไซเคิลหรือนำกลับมาใช้ใหม่
ผลิตภัณฑ์ในกลุ่ม ParaProduct เป็น Monoaxial Geogrid สมรรถนะสูงของ Maccaferri โดยทุกรุ่นได้รับการรับรองจาก BBA และได้รับการออกแบบให้เหมาะกับลักษณะงานที่แตกต่างกัน ดังนี้:
ParaGrid
Geogrid ที่มี แกนเสริมกำลังสูงและหุ้มด้วย PE เคลือบหนา มีกำลังรับแรงดึงตั้งแต่ 30–200 kN/m เหมาะสำหรับ งานเสริมกำลังดินทั่วไป โดยเฉพาะงานโครงสร้างกันดิน สามารถใช้ได้กับดินหลายประเภท รวมถึง ดินที่มีสภาวะกัดกร่อนและมีค่า pH สูง
ParaGrid HF
ParaGrid HF มีโครงสร้างคล้ายกับ ParaGrid แต่ได้รับการออกแบบให้ใช้ร่วมกับระบบ TerraMesh เป็น วัสดุเสริมกำลังหลัก มีกำลังรับแรงดึงตั้งแต่ 90–250 kN/m และสามารถใช้ได้กับดินหลายประเภท รวมถึง ดินที่มีสภาวะกัดกร่อนและมีค่า pH สูง
ParaLink
ParaLink เป็น Geogrid กำลังรับแรงดึงสูงที่ออกแบบสำหรับงานเสริมกำลังใต้คันทาง เช่น ฐานคันทางบนเสาเข็ม งานก่อสร้างในพื้นที่เสี่ยงต่อการเกิด หลุมยุบ และงานก่อสร้างบน ชั้นดินอ่อน รวมถึงสามารถนำไปใช้กับงานเสริมกำลังประเภทอื่นได้ มีกำลังรับแรงดึงตั้งแต่ 300–1,600 kN/m และเหมาะกับดินหลายประเภท รวมถึงดินที่มีสภาวะกัดกร่อนและมีค่า pH สูง
ParaDrain
ParaDrain มีโครงสร้างพื้นฐานคล้ายกับ ParaGrid แต่เพิ่ม ความสามารถในการระบายน้ำแนวรับแรงหลัก (MD) โดยขึ้นรูปแถบเสริมกำลังให้มี ร่องระบายน้ำและปิดด้วยชั้นกรอง Geotextile โครงสร้างนี้ช่วยให้ ParaDrain สามารถเสริมกำลังและระบายน้ำได้ในผลิตภัณฑ์เดียว จึงเหมาะสำหรับ ดินเนื้อละเอียดหรือดินเหนียวในงานวิศวกรรมปฐพีที่มีเงื่อนไขซับซ้อน
Paragrid W
Paragrid W เป็น Geogrid ชนิดถักสมรรถนะสูง มีค่าโมดูลัสสูง (high modulus) และค่าปัจจัยลดทอนต่ำ (lowest reduction factors) จึงคงกำลังรับแรงได้ดีตลอดอายุการใช้งาน ผลิตภัณฑ์ได้รับการออกแบบสำหรับ งานเสริมกำลังดินทั่วไป โดยเน้นการใช้งานกับกำแพงกันดินแบบบล็อกแยกชิ้น และเหมาะสำหรับดินทั่วไปที่มีค่า pH ระหว่าง 4–9
เรื่องราวความสำเร็จ:
จากแบบสู่การก่อสร้างจริง
ค้นพบเพิ่มเติม
AGRIPORT, MAYDON WHARF
A 12 000m² warehouse for storage of thousands of tons of soya had to be built on of low bearing, silty, fine hydraulic fills which are up to 4m in depth at the Durban Harbour area. These hydraulic fills are underlain by silty sand horizons which are interspersed by sandy clay and sandy clayey silts, which vary from 2m to about 20m in thickness. Calcareous sandstone, soft shale and siltstones were also found at depths of between 25-27m below ground. The water table was at 1. 6m below natural ground. The client needed the structure to be finished as quickly as possible. The challenge was to provide a suitable foundation to carry such huge loads, on such poor founding conditions, in the quickest time.
ค้นพบเพิ่มเติม
BE-ANTWERP MALINAS
The access road of a new retail center has been planned in Mechelen, Belgium, to let customers easily drive to the new shopping mall. Initially, the retaining wall for the ramp leading to the bridge abutment had been planned as a concrete L-retaining wall, but, thanks to the technical support of Maccaferri, the design has been changed in favour of 530 sqm MacRes System with 12. 000 lm of ParaWeb reinforcement. Due to the bad foundation soil characteristics, the contractor asked Maccaferri´s support also for the calculation and delivery of 1. 100 sqm of ParaLink 950 as basal reinforcement over piles. Smooth standard panels have been chosen.
ค้นพบเพิ่มเติม
CONSERVATION AND RESTORATION PROJECT FOR BUENG TAKENG, BANG RAKAM
Thailand
Bueng TaKeng is a big freshwater area located in Bang Rakam district having the potential to store water of around 14. 0 million cubic meters and before this project, the potential for water reservation was lost by around 50%. If the study of the potential of this project for restoration to improve the efficiency of restoration by get the inlet from KhaoRang Canal, Pho Canal and Tamo Canal this can be reducing the drought problem during the dry season and mitigating flooding issues during the Monsoon season. Moreover, the main issue in the area is the collapse of riverbanks due to erosion caused by water flow, which leads to instability and sloping. Therefore, it is necessary to address this problem properly and sustainably to accommodate the water diversion from the mentioned canals.
ค้นพบเพิ่มเติม
สิ่งที่เราทำได้กับ
MonoAxial GeoGrids
โซลูชัน
ติดต่อเรา
[contactForm_txtSuccessSubmit]