MacMat HS
Reinforced geomat for slope stabilization
MacMat HS is the next-generation of high performance geomats, combining a three-dimensional matrix polymeric geomat reinforced with Maccaferri’s Steelgrid system. It is used for demanding slope face stabilisation applications which require a combination of erosion protection and superficial stabilisation.
The reinforcing hexagonal steel wire mesh has mechanical performance characteristics that exceed those recommended in EN 10223-3. The wire is heavily galvanised with Zn-Al5% in accordance with 10244-2, Class A.
The galvanised wire and reinforcing cables are also available with an additional polymeric coating. Mechanical performance of the product (tensile strength, puncture resistance) is the same as Maccaferri Steelgrid.
Success Stories
Built, not just drawn
Discover more
CLIFF LANDSLIDE REPAIR AT AL-HUSAINIYYAH MUTHOYYIBAH FOUNDATION'S
Indonesia
A landslide that occurred in the area behind the slopes of the Al-Husainiyyah Foundation on April 23 2023, cut off the road connecting the foundation and residents' houses to the main road, thus hampering the mobility of residents to carry out their activities. Thus, Parahyangan Catholic University initiated to conduct a landslide repairs charity program in the area, in collaboration with several big engineering industries in Indonesia, one of which was Maccaferri Indonesia.
Discover more
EROSION CONTROL FOR CIAWI DAM PROJECT
Indonesia
On December 23, 2022, the President of Indonesia, Joko Widodo, inaugurated the Ciawi Dam in Bogor, West Java. The construction of the Ciawi Dam is a significant infrastructure project aimed at addressing the flooding issues in Jakarta, boasting a water storage capacity of 6 million cubic meters and a floodplain area of approximately 39. 40 hectares. As Indonesia's first dry dam, the Ciawi Dam introduces a unique approach to water resource management. Unlike conventional dams, which store water and form lakes, the Ciawi Dam is designed to allow water to flow through. This design aims to significantly reduce the risk of flooding in Jakarta, with an estimated reduction of 30. 6 percent. Focused on diminishing the flood discharge heading towards Jakarta, the Ciawi Dam is expected to cut down flood volumes by up to 111. 75 cubic meters per second. The dam is strategically located to control the water flow from Mount Gede and Mount Pangrango before it moves towards the Katulampa Dam and ultimately flows into the Ciliwung River. During the construction process, the main challenge faced was the potential erosion on the cut hill slopes, which could pose a risk to the area below. The condition of these slopes could cause serious hazards to the dam facilities themselves. Spillways, roads, and other facilities around these slopes are at significant risk. This situation triggers the need for swift and effective measures to prevent further landslides. The solution for controlling erosion involves the use of MacMat® HS with vegetation to prevent landslides in the area.
Discover more
EROSION CONTROL FOR TIU SUNTUK
Indonesia
In the access road area to the Tiu Suntuk Dam, West Nusa Tenggara, excavation works have created steep and tall slopes that are vulnerable to surface landslides—especially during the rainy season or periods of heavy runoff. The loose and poorly compacted soil further increases the risk of failure, posing safety concerns and potentially disrupting infrastructure development. In response, the Ministry of Public Works and Housing (PUPR) encourages the use of alternatives to conventional shotcrete methods. This aligns with their commitment to sustainable, environmentally friendly, and locally adaptive construction technologies. The project reflects the government’s effort to balance technical performance with long-term ecological responsibility in strategic infrastructure development.
Discover more
Deep dive into
MacMat HS
What we can do with
MacMat HS
Applications
Get in touch with us
[contactForm_txtSuccessSubmit]