Advanced Slope Stabilization Solutions to Enhance Safety, Stability, and Long-Term Performance at the Muara Laboh Geothermal Power Plant Project

The Muara Laboh Geothermal Power Plant Project required an effective slope stabilization solution to address challenging terrain, erosion risks, and potential slope instability. Maccaferri’s geotechnical engineering solutions were implemented to enhance slope stability, improve safety, and provide long-term protection for critical infrastructure, supporting the development of resilient and sustainable geothermal energy infrastructure in Indonesia.

The Challenge: Slope Instability at Wellpad E

Landslides and erosion occurred along the cut slope of the Wellpad E Access Road at the Muara Laboh Geothermal Power Plant Project. Changes to the natural drainage system and rainwater infiltration were identified as potential contributing factors to the slope instability. The affected area covered approximately 980 m², with a slope length of 28 meters and a height reaching 35 meters.

Given the steep terrain, Maccaferri Indonesia recommended an integrated slope stabilization and erosion control solution to mitigate the risk of further landslides and surface erosion. The solution combined the Paramesh System for structural slope reinforcement with MacMat HS for erosion control and surface protection.

At the lower section of the slope, a Mechanically Stabilized Earth (MSE) Wall using the Paramesh System was installed to support the cut slope above. The system combines Terramesh System as secondary reinforcement and facing, MacGrid WG15 geogrid as primary reinforcement, and MacTex N nonwoven geotextile for separation and filtration.

At the upper section, MacMat HS was installed together with vegetation to protect the exposed slope surface against erosion. MacMat HS provides immediate surface protection, while vegetation supports long-term erosion control and environmental integration. The system was also combined with soil nailing to enhance overall slope stability.

Maccaferri Indonesia provided comprehensive support from engineering design and technical recommendations to material supply and on-site Product Assistance during construction. Most materials used were locally manufactured in Indonesia, supported by TKDN certification and compliance with relevant standards. Maccaferri products are also covered by Environmental Product Declarations (EPDs), supporting more resilient and sustainable infrastructure.