MacMat
Advanced Solutions for Erosion Control and Soil Reinforcement
Geomats are made of synthetic material filaments. The filaments are heat-tangled together to form a three-dimensional, highly deformable and of high porosity (normally around 90% or even higher) layer. Geomats are a suitable permanent long-term solution able to manage erosion control problems in either dry or wet environments. These mats can properly protect a slope from the erosion caused by the water flux of rain drops, rills or rivers.
Success Stories
Built, not just drawn
Discover more
DEADMAN WASH, TSMC CHANNEL INFRASTRUCTURE
United States
They needed to protect their new infrastructure from erosion caused by the Deadman Wash in North Phoenix Arizona. They needed to re-grade a channel that was 2 miles long, 300 ft wide and 6 ft tall to divert the storm water and prevent soil loss at the bed and banks. We also used semi-rigid hydraulic protection to suit the arid climate of the region. They needed to complete the project in a short time, with enough monetary savings and approval from the Maricopa Flood Control District. The Installation of the project was performed by BUESING Corporation Contracting.
Discover more
EROSION CONTROL FOR CHANNEL LINING IN MACKAY
Australia
Hastings Deering, a distributor of Caterpillar in Australia, was moving into new facilities in Paget, Queensland. Due to the large open areas of impermeable surfaces, the rainwater run-off would be significant. The new facilities therefore required drainage channels to be constructed around the perimeter of the development to serve as flood protection during high rainfall periods. Flows and therefore hydraulic loads within the channel would be high, and erosion protection was required. A traditional rock lining was rejected as the client wanted to embrace a more environmentally sensitive ‘green’ solution which could also withstand high flows.
Discover more
FESTIVAL SUPERMALL MOUND PROMONTORY
Filinvest Land Incorporated (FLI), one of the country’s top land developers, expanded and upgraded an existing shopping mall complex, the Festival Supermall, located in the southern part of Metro Manila. The mall features a scenic landscape of terrains and flats, and right at the heart of the mall's green landscapes was a proposed mound promontory. The promontory is a naturally-cut slope with average facing angle of 70 degrees. A visit to the site was first conducted in the first quarter of 2015. The top portion of the mound was planned to be used as a small park and as a viewing deck. In this, to protect the cut slopes of the mound promontory against possible erosion due to rainfall and surface runoff, FLI required a slope protection system.
Discover more
What we can do with
MacMat
Get in touch with us
[contactForm_txtSuccessSubmit]